Tool Dependency Check

rb tool-check reports which external tools rtl_buddy has located, which subcommands are ready to run, and which are blocked on a missing or outdated dependency. It is a diagnostic surface for the declarative tool manifest — the same source of truth that subcommand wrappers consult when they refuse to run because a tool is missing.

rb tool-check must work both inside and outside a project: it opportunistically discovers a root_config.yaml to honor project pins (verible/surfer paths, cfg-tools min-versions, cfg-fpv-tools solver pins), but degrades gracefully when none is present.

Quick start

# Default — text report of all tools + per-subcommand readiness
rb tool-check

# JSON for scripting / CI
rb tool-check --format json

# Only the deps relevant to one subcommand
rb tool-check --required-for fpv

# Install instructions for a single tool
rb tool-check --explain surfer

# Fail the shell when something required is missing/outdated
rb tool-check --strict

rb tool-check runs at the top level — it does not require a root_config.yaml, a suite directory, or any prior command. The --include-optional/--no-include-optional flag (default on) controls whether optional tools (gtkwave, klayout, graphviz, pyslang, cocotb, FPV solvers, etc.) appear in the report.

Output

The default text format has two sections plus a hint line:

Tools (12 ok, 1 missing, 1 outdated)
----------------------------------------------------------------------
Tool                  Status      Version       Path
verible               ok          v0.0-3724     /opt/homebrew/bin/verible-verilog-syntax
yosys                 ok          0.45+115      /opt/homebrew/bin/yosys
verilator             outdated    5.0.18        /opt/homebrew/bin/verilator  (need ≥ 5.020)
surfer                ok          0.3.0         /opt/homebrew/bin/surfer
sby                   missing     —             —  (optional)
...

Subcommand readiness
----------------------------------------------------------------------
  ok        rb test                 (verible, yosys, verilator, ...)
  outdated  rb test                 (outdated: verilator)
  missing   rb fpv                  (needs: sby)                            (optional feature)
  ...

Hint: `rb tool-check --explain <tool>` for install instructions.

The Tools section is the per-tool table — name, status (ok / missing / outdated), captured version, resolved path. Python-package detectors show (python) in the Path column. A (need ≥ X) suffix appears when a tool is present but below minimum_version. An (optional) suffix appears for tools whose absence does not gate any subcommand.

The Subcommand readiness section lists every rb <subcommand> whose deps are declared in the manifest. The gloss after each subcommand calls out what is missing or outdated, or lists the participating tools when everything is OK. (optional feature) indicates a subcommand whose deps are all optional — rb wave is ready even without gtkwave installed, for example.

Subcommand: `--required-for`

rb tool-check --required-for fpv

Narrows the report to just the tools whose used_by: includes the named subcommand. Pairs naturally with --strict for a "is rb fpv ready right now?" CI check:

rb tool-check --required-for fpv --strict || \
  { echo "rb fpv is not ready — see above"; exit 1; }

Exit code semantics under --required-for differ slightly from the default — see Exit codes below.

Subcommand: `--explain`

rb tool-check --explain surfer

Prints the full manifest entry for a single tool — description, used-by subcommands, per-platform install hints, minimum version, and optional notes. Example:

surfer — Web-native waveform viewer
  Status:  ok
  Version: 0.3.0
  Path:    /opt/homebrew/bin/surfer
  Used by: rb wave, rb wave-fpv, rb hub
  Install:
    source   https://github.com/rtl-buddy/surfer (branch rtl-buddy)
    build    cd ../surfer && cargo build --release

This is also what subcommand wrappers point you at when they refuse to run because a tool is missing — e.g. rb wave saying "surfer not found — run rb tool-check --explain surfer".

JSON output

rb tool-check --format json

Emits a structured payload with tools, subcommands, and a top-level exit_code (the same code the process exits with). Schema sketch:

{
  "tools": {
    "verible": { "status": "ok", "version": "v0.0-3724", "path": "/opt/homebrew/bin/...", "optional": false },
    "sby":     { "status": "missing", "version": null, "path": null, "optional": true }
  },
  "subcommands": {
    "fpv":  { "status": "missing", "missing": ["sby"], "outdated": [], "optional_feature": true },
    "test": { "status": "ok", "missing": [], "outdated": [] }
  },
  "exit_code": 1
}

JSON output is the wire format for CI agents and IDE integrations — rb tool-check --format json is stable enough to script against. Combine with --required-for to narrow the result to a single subcommand.

How the manifest works

The single source of truth lives in src/rtl_buddy/tool_manifest.py. Each ToolSpec declares:

Field	Purpose
`name`	Canonical key used by `--explain`, JSON output, and runtime `require()`
`binaries`	Binary names to look for; first one found wins
`version_cmd` / `version_regex`	How to probe and parse the installed version
`minimum_version`	Lower bound; if violated, status flips to `outdated`
`detection`	Ordered detectors (`PathDetector`, `VendorDetector`, `AbsolutePathDetector`, `PythonPackageDetector`, `PythonSiblingDetector`) — first `found=True` wins
`install_hint`	Per-platform install instructions for `--explain`
`used_by`	Subcommands gated by this tool; drives the readiness section
`optional`	If true, missing does not gate subcommand readiness

The same ToolSpec is consulted at runtime when a wrapper invokes tool_manifest.require("<name>") — that's how subcommand wrappers produce a uniform "missing tool, see rb tool-check --explain X" message instead of an opaque FileNotFoundError.

Reconciliation with `root_config.yaml`

When a project's root_config.yaml is discoverable from the current directory, rb tool-check reconciles it with the manifest:

cfg-verible — the active platform's verible directory is added to verible's detector chain as the preferred lookup, with PATH retained as fallback.
cfg-surfer — the surfer-default entry's resolved path is added similarly.
cfg-tools — overrides minimum_version for any matching tool. Project pins always win over manifest defaults.
cfg-fpv-tools[*].opts.solver-versions — pins each FPV solver to an exact version. Runtime semantics is exact-equality (rb fpv hard-fails on mismatch); rb tool-check surfaces the pin as minimum_version so users see a single "outdated" indication for solvers that don't match.

Outside a project (no root_config.yaml discoverable), the manifest defaults apply unchanged. The "outside a project" mode is important for first-run setup: rb tool-check after pip install rtl_buddy is a valid invocation and tells the user what to install before they create a project.

Version cache

Probed versions are cached to ${XDG_CACHE_HOME:-~/.cache}/rtl_buddy/tool_versions.json keyed by (path, mtime). The cache makes repeated rb tool-check invocations cheap — most tools don't need to be re-probed if their binary hasn't changed. Pass --no-probe-versions to skip version probing entirely (faster, but the Version column shows — for everything).

Exit codes

Exit	Meaning
`0`	All required tools present and up-to-date (optional gaps don't matter)
`1`	At least one required tool missing or outdated
`2`	`--required-for <sub>` was passed and that subcommand's deps are missing/outdated

--strict is implied for --required-for — exit code semantics differ from the default to make the "this one subcommand is broken" case distinguishable from the broader "some tool, somewhere, is missing" case.

When to use it

First-time setup. Right after uv add rtl_buddy, run rb tool-check to see which external tools you still need to install for the subcommands you care about.
CI gate. A rb tool-check --strict step at the start of a CI job fails fast with an actionable error if the runner image drifted from the expected toolchain.
Triaging a "tool not found" error. When a subcommand wrapper says "X not found — run rb tool-check --explain X", that's the canonical entry point.
After upgrading a tool. Re-running rb tool-check after brew upgrade verilator (etc.) updates the cached version and re-evaluates minimum_version checks.

Out of scope (today)

Tool installation. rb tool-check reports state and gives install hints; it does not run installers itself. Treat the install hints as documentation, not as automation.
Cross-platform install scripts. Hints are per-OS (macos, linux, source, vendor, any); a unified setup script generator is a future possibility but not built today.
Custom user manifests. The manifest is built-in; projects can pin versions and binary paths via root_config.yaml, but they cannot add wholly new tools to the manifest. Adding a tool is a code change to src/rtl_buddy/tool_manifest.py.

Quick start​

Output​

Subcommand: --required-for​

Subcommand: --explain​

JSON output​

How the manifest works​

Reconciliation with root_config.yaml​

Version cache​

Exit codes​

When to use it​

Out of scope (today)​